Roof switch panel housing
3 Different panel types: Auxbeam 8 switch panel, Switch pros 9100, and Small toyota switches(OEM, CH4x4, Caliraised, tacomabeast, etc. )
*Known to fit 08+ Sequoia, 14-21 Tundra (Please check photos, if your panel matches)
Note: you will need to do some cutting for this panel to work as intended
*included installation hardware
*Panel is oversized to hide cut lines
*Printed using UV stable material
*Made to order
Quick install guide:
Remove 4 torx bolts from oem panel (2 in sunglass holder and 2 behind letter panel) *Pull on Sunroof button panel flap to remove
Drill and cut the panel as seen in photos ( Use paint on back on bolt heads to transfer to identify where to drill )
Cut sunroof switch panel tab even with panel cutout
Cut a small hole for the panels wire harness
Remove the front half of the switch panel and install it onto your new panel
Install into your oem panel with the included hardware *DO NOT overtighten hardware
3 Different panel types: Auxbeam 8 switch panel, Switch pros 9100, and Small toyota switches(OEM, CH4x4, Caliraised, tacomabeast, etc. )
*Known to fit 08+ Sequoia, 14-21 Tundra (Please check photos, if your panel matches)
Note: you will need to do some cutting for this panel to work as intended
*included installation hardware
*Panel is oversized to hide cut lines
*Printed using UV stable material
*Made to order
Quick install guide:
Remove 4 torx bolts from oem panel (2 in sunglass holder and 2 behind letter panel) *Pull on Sunroof button panel flap to remove
Drill and cut the panel as seen in photos ( Use paint on back on bolt heads to transfer to identify where to drill )
Cut sunroof switch panel tab even with panel cutout
Cut a small hole for the panels wire harness
Remove the front half of the switch panel and install it onto your new panel
Install into your oem panel with the included hardware *DO NOT overtighten hardware
3 Different panel types: Auxbeam 8 switch panel, Switch pros 9100, and Small toyota switches(OEM, CH4x4, Caliraised, tacomabeast, etc. )
*Known to fit 08+ Sequoia, 14-21 Tundra (Please check photos, if your panel matches)
Note: you will need to do some cutting for this panel to work as intended
*included installation hardware
*Panel is oversized to hide cut lines
*Printed using UV stable material
*Made to order
Quick install guide:
Remove 4 torx bolts from oem panel (2 in sunglass holder and 2 behind letter panel) *Pull on Sunroof button panel flap to remove
Drill and cut the panel as seen in photos ( Use paint on back on bolt heads to transfer to identify where to drill )
Cut sunroof switch panel tab even with panel cutout
Cut a small hole for the panels wire harness
Remove the front half of the switch panel and install it onto your new panel
Install into your oem panel with the included hardware *DO NOT overtighten hardware
